DAS/RF Components

Pipe-To-Pipe Clamp Joins Two 2-3/8” to 5” OD -  PPC-35-14 Pipe to Pipe Clamps Galvanized Steel Construction Includes DCP clamp, hardware and 5/8" threaded rod Part Number           Mounting...

Product Description For use with 4" boots and boot kits.  Boots and Boot kits sold separately. Brushed Aluminum Powder Coated Finish Comes with one entry port cap per hole and mounting hardware   Part...

Standard 2" Solid Copper Bus Bars with Grounding Hardware Kit Solid 1/4” thick copper bus bars Universal hole pattern accepts 2 hole lugs with 3/4” and/or 1” spacing Custom patterns and hole sizes available Includes complete...

TXM Snap-In Hangers Snap in hanger for 1/2″ to 2-1/4″ cable and trunkline.   Product Description 304 Stainless Steel Designed for efficient cable retention Smooth Edging to prevent cuts Kits of 10 Part...

BB-HOR-2-19-K2 - 2" x 19" UNTAPPED HORIZONTAL COPPER BUSBAR WITH ISOLATION PAD KIT  DOWNLOAD SPEC SHEET HERE   1RU ISO PAD AND HARDWARE KIT   This is a 1RU kit and 1 kit will need to be ordered for each RU position you are mounting...

TXM 4" Boot Kit with Inserts Part Numbers BK-4-1-3/8 Boot Kit with One-Hole Cushion Insert for 3/8" BK4138 BK-4-3-3/8 Boot Kit with Three-Hole Cushion Insert for 3/8"BK4338 BK-4-1-1/2 Boot Kit with One-Hole Cushion Insert for 1/2"BK4112 BK-4-2-1/2...

GKS38 - STANDARD GROUND KIT FOR 3/8" COAX CABLE LMR400, LOW400 EQUAL TO 223158-4 TXM’s standard grounding kits include strap riveted to the ground wire, a coiling tool for proper tightening, tower attachment hardware and 2 part tape...

Strut End Caps White- Pack of 100 Used to protect the sharp ends of a strut Available in White and Red For 1-5/8″ x 1-5/8″ strut 

POLYPHASER 125-1000 MHz general coverage bulkhead mnt. protector. 50,000 amps surge. <220uJ throughput energy. Power based on frequency. N female connectors.

TXM Universal Angle Adapters Stainless Steel Universal Angle Adapter with 3/4" HoleIncludes 3/8" Set Bolt Product Description 304 Stainless Steel Angle Adapter with 3/4” Hole and locking set bolt Ideal for Snap in adapters New Design allows...

#65 EXOTHERMIC WELD METAL SHOT CASE OF 20 TXM's new line of field ready exothermic molds allow you to make critical welding connections with no outside source of power.  Our exothermic welding system uses an exothermic chemical reaction to make...

Pipe-To-Pipe Clamp Joins Two 2-3/8” to 5” OD 18" Extensions Pipe to Pipe Clamps Galvanized Steel Construction Includes DCP clamp, hardware and 5/8" threaded rod Part Number           Mounting Diameter...